J17 - underside of board
Pinout SATA data connector

J17 is a Molex 47080-4002 Horizontal Mount SATA connector that provides connectivity to an external SATA drive. This is the data connector only. To provide power to a SATA drive, pick up +5V from an unused USB port through a USB to SATA POWER adapter cable. This is adequate for most SSD SATA drives. For other drive types that need other SATA voltages besides +5V, use an external supply to supply voltage to the drive. Note this SATA connector is only present (and is optional) of revision 4 or greater of the Piconium board. It is located on the under side of the board.

Pin Description
1 GND
2 A+
3 A-
4 GND
5 B-
6 B+
7 GND

Contact Us

We don’t believe in the run-around. If you have any questions about our products or services, you can speak directly with our engineering team. You can get your answer right from the source.

Speak With An Engineer

Totally free and no obligation.